Differences between revisions 2 and 3
⇤ ← Revision 2 as of 2013-08-02 20:32:03 →
Size: 1154
Editor: PieterSmit
Comment: save for weekend
← Revision 3 as of 2017-11-08 19:20:54 → ⇥
Size: 1152
Editor: PieterSmit
Comment:
Deletions are marked like this. Additions are marked like this.
Line 8: Line 8:
   * option 43 hex f1 04 + [[IP in hex]]    * option 43 hex f1 04 + [IP in hex]

Cisco WLC4400

  • 201308 lightweight cisco ap's refuse to register after controller factory reset.
  • DHCP on router to enable ap's to find controller
    • option 43 hex f1 04 + [IP in hex] {{
  • Debug , ssh into controller
    • show auth-list
    • debug pm pki enable 
      • *spamReceiveTask: Aug 02 08:43:38.905: sshpmGetIssuerHandles: SSC is not allowed by config; bailing...
*spamReceiveTask: Aug 02 08:43:38.906: 00:11:5c:1b:8f:70 DTLS connection 0x1386ab68 closed by controller
*spamReceiveTask: Aug 02 08:43:38.906: CAPWAP DTLS connection closed msg
    • debug capwap events enable 
      • SSC is not allowed by config; bailing...

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00806a426c.shtml You can recognize this problem when a Lightweight AP Protocol (LWAPP)-converted AP does not associate to the WLC. When you troubleshoot the association problem, you see these outputs when you issue these debugs:

  • debug capwap errors enable

...

cisco/WIFI/Controller (last edited 2017-11-08 19:20:54 by PieterSmit)