Cisco WLC4400
- 201308 lightweight cisco ap's refuse to register after controller factory reset.
- DHCP on router to enable ap's to find controller
- option 43 hex f1 04 + [IP in hex] {{
- Debug , ssh into controller
- show auth-list
- debug pm pki enable
*spamReceiveTask: Aug 02 08:43:38.905: sshpmGetIssuerHandles: SSC is not allowed by config; bailing... *spamReceiveTask: Aug 02 08:43:38.906: 00:11:5c:1b:8f:70 DTLS connection 0x1386ab68 closed by controller *spamReceiveTask: Aug 02 08:43:38.906: CAPWAP DTLS connection closed msg
- debug capwap events enable
SSC is not allowed by config; bailing...
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00806a426c.shtml You can recognize this problem when a Lightweight AP Protocol (LWAPP)-converted AP does not associate to the WLC. When you troubleshoot the association problem, you see these outputs when you issue these debugs:
- debug capwap errors enable
...