IPTABLES

• see linux/firewall

• update rules for dynamic dns hosts linux/iptables/dyndns

• iptables handling overlapping subnets linux/iptables/overlap

== 2015 Problem redirecting traffic from outside interface to vnc service listening on localhost:127.0.0.1 =

• http://wiki.clover.co.za/FrontPage?action=fullsearch&context=180&value=iptables&titlesearch=Titles

• http://serverfault.com/questions/551361/redirect-incoming-packets-to-loopback

• http://serverfault.com/questions/504389/how-to-configure-port-forwarding-to-enable-internal-service-accessed-by-another?rq=1

• http://serverfault.com/questions/149929/how-to-configure-traffic-from-a-specific-ip-hardcoded-to-an-ip-to-forward-to-ano?rq=1

Interesting modules 2010

1. comment - Allows you to add comments (up to 256 characters) to any rule.

   •        --comment comment
            Example:
                   iptables -A INPUT -s 192.168.0.0/16 -m comment --comment "A pri‐
                   vatized IP block"

2. connlimit
   • Allows you to restrict the number of parallel connections to a server per client IP address (or client address block).
3. rateest
   • The rate estimator can match on estimated rates as collected by the RATEEST target. It supports matching on absolute bps/pps values, com‐ paring two rate estimators and matching on the difference between two rate estimators.
4. recent
   • Allows you to dynamically create a list of IP addresses and then match against that list in a few different ways. For example, you can create a "badguy" list out of people attempting to connect to port 139 on your firewall and then DROP all future packets from them without considering them.
5. time
   • This matches if the packet arrival time/date is within a given range. All options are optional, but are ANDed when specified.
6. TRACE
   • This target marks packes so that the kernel will log every rule which match the packets as those traverse the tables, chains, rules. (The ipt_LOG or ip6t_LOG module is required for the logging.) The packets are logged with the string prefix: "TRACE: tablename:chain‐ name:type:rulenum " where type can be "rule" for plain rule, "return" for implicit rule at the end of a user defined chain and "policy" for the policy of the built in chains. It can only be used in the raw table.

Common Problems and solutions

• Multi-interface setup ignoring/dropping packets on certain interfaces
  • Caused by reverse path filtering.

    • Fix:

             # Enables source route verification
             net.ipv4.conf.default.rp_filter = 2
             # Enable reverse path
             net.ipv4.conf.all.rp_filter = 2

...

CategoryLinux