Differences between revisions 3 and 4
⇤ ← Revision 3 as of 2017-07-29 10:07:46 →
Size: 495
Editor: PieterSmit
Comment:
← Revision 4 as of 2017-07-29 11:29:22 → ⇥
Size: 790
Editor: PieterSmit
Comment:
Deletions are marked like this. Additions are marked like this.
Line 12: Line 12:
    1. See IPv6 under [ADVANCED] -> [Advanced Setup] -> [IPv6]     1. See IPv6 under [ADVANCED] -> [Advanced Setup] -> [IPv6] -> [Internet Connection Type] = [DHCP]
    1. It get a ip
       * Router's IPv6 Address On WAN 2403:9800:C041:FFE0:42F4:405D:82FF:A553/64
       * LAN Setup
         * Router's IPv6 Address On LAN 2403:9800:C048:0850:425D:82FF:FEFF:A552/60
         * IP Address Assignment = [Auto Config]

BigPipe ISP NZ

  1. 201707 Ask to have IPv6 enabled on my UFB fiber connection.
    • Email bigpipe and ask them to enable IPv6 (beta) on my link.
  2. Netgear D7000 - Wifi ADSL modem Firmware Version V1.0.1.48_1.0.1
    1. Reboot

    2. [ADVANCED] -> [Advanced Setup] -> [IPv6]

      • [Internet Connection Type] -> [DHCP]

    3. Reboot

    4. See IPv6 under [ADVANCED] -> [Advanced Setup] -> [IPv6] -> [Internet Connection Type] = [DHCP]

    5. It get a ip
      • Router's IPv6 Address On WAN 2403:9800:C041:FFE0:42F4:405D:82FF:A553/64
      • LAN Setup

        • Router's IPv6 Address On LAN 2403:9800:C048:0850:425D:82FF:FEFF:A552/60

        • IP Address Assignment = [Auto Config]

...

ipv6/BigPipe (last edited 2017-07-29 11:29:22 by PieterSmit)