Differences between revisions 2 and 6 (spanning 4 versions)

Eco friendly building

Heat mass

^1^A simplistic rule of thumb that is often used when designing dense masonry walls, is that heat will be absorbed and lost at around an inch per 2 hours. i.e a 4inch (100mm) thick masonry wall will absorb and shed its heat load in around 8 hours and a 8inch (200mm) thick wall in around 16 hours.

-  ⇤ ← Revision 2 as of 2010-02-27 07:21:53 → 
  Size: 270
  Editor: PieterSmit
  Comment:
+   ← Revision 6 as of 2014-05-01 12:51:41 → ⇥
  Size: 850
  Editor: PieterSmit
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 8:
+ * Designing underfloor water heating. [[attachment:ITS-SOLAR-underfloor-heatingAfripex.pdf]]
 * Twisted fishingline muscles
    * http://io9.com/scientists-just-created-some-of-the-most-powerful-muscl-1526957560
= Heat mass =
-Line 9:
+Line 13:
-...
+ * [[http://en.wikipedia.org/wiki/Trombe_wall | ^1^ ]]A simplistic rule of thumb that is often used when designing dense masonry walls, is that heat will be absorbed and lost at around an inch per 2 hours. i.e a 4inch (100mm) thick masonry wall will absorb and shed its heat load in around 8 hours and a 8inch (200mm) thick wall in around 16 hours.