##master-page:HomepageReadWritePageTemplate
##master-date:Unknown-Date
#format wiki
#language en
= Cisco Rommon and password recovery notes =
 * Cisco 1841
   * Break on terminal during boot to get to rommon >1
     * confreg 0x2142
     * 1> resety
     * after put back "0x2102"
   * If password recovery disabled due to "no service password-recovery" this may work
     {{{
Another method is to reload or boot the router with console access, and press CTRL-BREAK within five to ten seconds of the Cisco IOS software image decompressing or roughly when the "Image text-base:... " part of the banner begins. You are then prompted to reset the router to factory default (erase start-up configuration).
     }}}
...
----
CategoryCisco