Differences between revisions 1 and 16 (spanning 15 versions)
Revision 1 as of 2017-09-08 22:28:56
Size: 474
Editor: PieterSmit
Comment:
Revision 16 as of 2017-12-14 08:19:13
Size: 2969
Editor: PieterSmit
Comment:
Deletions are marked like this. Additions are marked like this.
Line 11: Line 11:
== 12 Dec 2017 , Note3 stuck in boot loop after TWRP bootloader install on Android ==
 1. Down load github code {{{ git@github.com:Benjamin-Dobell/Heimdall.git }}}
 2. Follow instructions https://raw.githubusercontent.com/Benjamin-Dobell/Heimdall/master/Linux/README
 3. Make Heimdal
    1. sudo apt install cmake libusb-1.0-0-dev zlib1g-dev qt5-default libgl1-mesa-dev
    1. cd Heimdal
    1. mkdir build
    1. cd build
    1. cmake -DCMAKE_BUILD_TYPE=Release ..
    1. make
 4. {{{ sudo ./heimdall download-pit --output mypit.pit }}}
        {{{
Session begun.

Downloading device's PIT file...
PIT file download successful.

Ending session...
Rebooting device...
Releasing device interface...
         }}}

 5. Rebooted and all OK !!
 6. 201712 - Upgrade to latest [[mobilephone]] Phronesis rom


== 13 Dec 2017 - Flash Note3 - firmware/modem/radio with heimdal-frontend to resolve "network not available" ==
 * Already installed run from the build/bin/heimdal-frontend (Gui)
 * follow https://forum.xda-developers.com/showthread.php?t=878686
 * Steps
   1. download from sammobile '''firmware''' for SM-N9005 Note3, 1.3GB XFM
   1. sudo ./heimdall download-pit --output Note3pit.pit
   1. Un-zip, un-tar
   1. Now heimdall cant find Note3 in download mode, looking in syslog it looks like the mtp-probe is a problem
      * sudo gvim /lib/udev/rules.d/69-libmtp.rules
        {{{
#NOTE3 download pieter
ATTR{idVendor}=="04e8", ATTR{idProduct}=="685d", GOTO="libmtp_rules_end"
        }}}
      * ok working , {{{ sudo ./heimdall download-pit --output Note3_b_pit.pit --verbose --usb-log-level debug }}}
      * from log {{{
                     kernel: [ ] usb 1-1: Product: MSM8960
                     kernel: [ ] usb 1-1: Manufacturer: Sasmsung }}}
   1. select a file for each partition one by one from the un-zipped, untar'ed files.
      * There is a suggested file name as you add them.
      * Upload button only un-gray when all added.
      * can test usb connectivity on the [Utilities] tab, i had to try a better usb cable.
   1. Upload done, success, and reboot. (First time files on system partition, new usb cable, reboot PWR+Home+VolDown -> upload)
   1. Rebooted for a while, stuck on SAMSUNG sparkly screen. 12h30->13h10->13h33->14h05 Battery went flat, :(
   1. heimdal new modem, and TWRP 2.7.8.0, boot into TWRP, reflash Phronesis ROM v7.
   1. Reboot 10h07 to 10h16 9min boot, to gears Android is upgrading.

Heimdall - Mobile - Flash Rom Notes

  • 2017 Tried to flash rom on Note3
    • Ubuntu 16.04 - Heimdall package cant download PIT (Partition file) over usb from phone.
      • Worked after using GIT source ./heimdall info , Heimdall v1.4.2
        • sudo ./heimdall download-pit --output mypit.pit
    • After Heimdall saved the PIT it rebooted the phone and all was fine.
      • Used TWRP app to install recovery Note3-Int-Qualcomm

12 Dec 2017 , Note3 stuck in boot loop after TWRP bootloader install on Android

  1. Down load github code  git@github.com:Benjamin-Dobell/Heimdall.git 

  2. Follow instructions https://raw.githubusercontent.com/Benjamin-Dobell/Heimdall/master/Linux/README

  3. Make Heimdal
    1. sudo apt install cmake libusb-1.0-0-dev zlib1g-dev qt5-default libgl1-mesa-dev
    2. cd Heimdal
    3. mkdir build
    4. cd build
    5. cmake -DCMAKE_BUILD_TYPE=Release ..
    6. make
  4.  sudo ./heimdall download-pit --output mypit.pit 

    • Session begun.
      
      Downloading device's PIT file...
      PIT file download successful.
      
      Ending session...
      Rebooting device...
      Releasing device interface...
  5. Rebooted and all OK !!
  6. 201712 - Upgrade to latest mobilephone Phronesis rom

13 Dec 2017 - Flash Note3 - firmware/modem/radio with heimdal-frontend to resolve "network not available"

  • Already installed run from the build/bin/heimdal-frontend (Gui)
  • follow https://forum.xda-developers.com/showthread.php?t=878686

  • Steps
    1. download from sammobile firmware for SM-N9005 Note3, 1.3GB XFM

    2. sudo ./heimdall download-pit --output Note3pit.pit
    3. Un-zip, un-tar
    4. Now heimdall cant find Note3 in download mode, looking in syslog it looks like the mtp-probe is a problem
      • sudo gvim /lib/udev/rules.d/69-libmtp.rules
        • #NOTE3 download pieter
          ATTR{idVendor}=="04e8", ATTR{idProduct}=="685d", GOTO="libmtp_rules_end"
      • ok working ,  sudo ./heimdall download-pit --output Note3_b_pit.pit --verbose --usb-log-level debug 

      • from log

                             kernel: [ ] usb 1-1: Product: MSM8960
                             kernel: [ ] usb 1-1: Manufacturer: Sasmsung 
    5. select a file for each partition one by one from the un-zipped, untar'ed files.
      • There is a suggested file name as you add them.
      • Upload button only un-gray when all added.
      • can test usb connectivity on the [Utilities] tab, i had to try a better usb cable.
    6. Upload done, success, and reboot. (First time files on system partition, new usb cable, reboot PWR+Home+VolDown -> upload)

    7. Rebooted for a while, stuck on SAMSUNG sparkly screen. 12h30->13h10->13h33->14h05 Battery went flat, :(

    8. heimdal new modem, and TWRP 2.7.8.0, boot into TWRP, reflash Phronesis ROM v7.
    9. Reboot 10h07 to 10h16 9min boot, to gears Android is upgrading.

...

Linux/Heimdall (last edited 2017-12-14 08:19:13 by PieterSmit)