HP DL380 G7 - disk failure
- Try to reload with Linux, but the disk's is not writable.
- Download ACU tool to configure disks.
- Fixed by using the bios tool, f9 during boot, to reconfigure disks.rt
- These HP servers are really slow to startup.
HP Server Smart Start 2015
- Got a 2nd Hand HP DL380 G7, installed ubuntu 15.04
- Notes on setting up an old HP server
- Needed to usb boot HP setup software to configure raid controller.
- Would not allow disks to be shown as JBOD, configured them as individual disks/raid sets.
- Needed to usb boot HP setup software to configure raid controller.
- Fan making a lot of noise.
- After googling, need HP proprietory hpasm tool, only found rpm packages.
# HP deb http://downloads.linux.hp.com/SDR/repo/mcp precise/current non-free
Look at http://downloads.linux.hp.com/SDR/repo/mcp/Ubuntu/dists/
- added to /etc/apt/sources.list.d/hp-mcp.list
# HP Management Component Pack # http://downloads.linux.hp.com/SDR/repo/mcp/Ubuntu/dists/ deb http://downloads.linux.hp.com/SDR/repo/mcp/Ubuntu 14.04-LTS/current non-free # update apt & install hpasmcli package # apt-get update && apt-get install hp-health # sudo hpasmcli
- sudo hpasmcli
- Dud, can only read fan speed, not set.
- After googling, need HP proprietory hpasm tool, only found rpm packages.
- Monitoring server using scripts from
...