Cisco PBR

interface Ethernet0
 ip address
 no ip directed-broadcast
 ip policy route-map net-10
access-list 111 permit ip any
route-map net-10 permit 10
 match ip address 111
 set interface Ethernet1    !!<<Only works if arp can resolve.>>!!
 !!or!!set ip next-hop  !!<<Better forwards to next hop router.>>!!
route-map net-10 permit 20

No special configuration is required to enable CEF-switched PBR. It is on by default as soon as you enable CEF and PBR on the router.



vigor: Cisco/PolicyBasedRouting (last edited 2012-09-10 09:14:20 by PieterSmit)